The new Linszter Datalog v2 is available on the Google Play Store, now with Crome QD3 protocol, and tons of new features.
If you want to be a Datalog 2 Beta tester, join to the Google+ Community.
The Honda Datalog new, version 1.2 now available on the Android Market.
IF YOU HAVE PROBLEMS WITH THE UPDATE UNINSTALL THE APPLICATION AND REINSTALL!
– eCtune support
– Android Honeycomb and Ice Cream Sandwich support
– New digital display
– New log viewer
– Ignition, Battery, TPS and Injector Duration logging
Now i try to make an article about the bluetooth device. You can read some information HERE, how you can connect the device to the ECU. I prefer THIS Elechouse Bluetooth device, because this works fine after you change the default communication settings. If you buy other device, be sure the device has 5V power supply and the communication settings is:
- Baudrate: 38400
- Stopbit: 1
- Checkbit: None
If you buy the Elechouse Bluetooth device, here is an article how you can change the default settings,
What you need:
- Honda Datalog cable (or other USB-TTL cable like Nokia DKU-5 what you use for datalogging)
- 5V power supply for the bluetooth device
- Arduino software (i use version 0022)
- some pins, cable…etc
You need to make a converter cable to connect the Datalog cable to the bluetooth device:
When you done switch the bluetooth device to AT mode (AT switch on the device. Make sure you switched the other switch to 5V power supply).
Now run the arduino software. On the tools menu, select your datalog cable COM port, then on the tools menu choose the Serial Monitor.
On the bottom, set the Serial Monitor to “Both NL & CR” and “38400 baud“. Then send an “AT” command to the device. If everything works, the device send back “OK“.
Now you can set your device. Send AT+ROLE=0 to change the device to slave mode. Then send AT+UART=38400,1,0 to set the device to works with the datalog app.
You can set other things, like device name, password…etc. HERE is the commands.
Now approaching the end of the year i have a little more free time. I want to update the Honda Datatabase to Version 2.0 (more articles…etc), the Nissan Database to Version 1.0 (more data) and fix the Honda Datalog problems and add all the new features (and of course the Bluetooth Device article, how can change the settings, which one good…etc) this year. Now i have money to buy the Moates OBD1 Engine Simulator to test the application every time when i want. I hope, i get it asap.
I got several bug reports with the Honda Datalog application and the Bluetooth Devices. One of my buddy make a Honda OBD0/OBD1 Engine Simulator hardware. When it’s done, i can test and fix the application / device bugs, and i can make new features and develope the application a little bit faster. Please be patient. I’ll make a full article about the application and the Bluetooth device settings ASAP.
I made a Honda Datalog DEMO application. Now everyone can try the application before buy it. The DEMO is limited to 2 minute view, no CSV logging and only Digital Display.
If you want to use the Honda Datalog for Android™ application (available this month!), you need a TTL – Bluetooth converter. This converter connected to the OBD0/OBD1 ECU-s CN2/CN3 datalog port.
This is our new application which available soon. It’s a Datalog application for older Honda’s with programmed OBD0/OBD1 ECU. The application connect to the ECU over bluetooth with a TTL-Bluetooth adapter (We post an article from the adapter later) and can see the sensors data realtime.